DIY TUTORIAL:

SPRINTER 144

Sprinter 144

This guide is for installing the entire Adventure Wagon Interior kit in a 2007-present 144 Sprinter Van.

Any additional written build notes below will be the most up-to-date instructions and the video should be used as a baseline.

Note on Electrical Wiring

There are a few differences with electrical installation between the NCV3 (2007-2018) and VS30 (2019+) sprinters for electrical wiring and it will be noted below.

Information for Passenger Vans

The guide is targeted for Crew and Cargo version vans. If you have a Passenger van there will be some customization required in the ceiling for Air Conditioning units as well as leaving the rear wall panels off where windows are present. Please call one of our installers or our tech support team for more information on passenger installs.

Installation Tips

Installation can be done over four to six days but can vary significantly based on skill and experience. It helps to have two people for A-frame bracing, track and panel installation.

FACTORY PART REMOVAL


KIT INSTALLATION


TOOLS INCLUDED WITH KIT


  • 4mm T handle hex key
  • Drill bits - 25/64 (rivnuts), 3/16 (rivets), 1/4 (rivets)


USE THE SLIDER BELOW TO EXPLORE EACH DAY OF THE BUILD↓

DAY 1

Preparation, Ceiling Fan, Electrical Harness & Hushmat

DAYS 2 & 3

A-Frame & Ceiling Bracer

DAY 4

Insulation

DAY 5

Final Assembly

Two people sitting in outdoor chairs around a campfire with their Adventure Wagon modular van behind them

Build Your Dream Van,
Step by Step

Our van configurator walks you through each choice so you can create a layout that fits your lifestyle. Still have questions? Get in touch with our team — we’re happy to help.
Get in touch